Harris Super Missileweld Steel Welding Electrode - 3/32" 18 electrodes
$24.00
Super Missileweld
Description: Steel Welding Electrode
The ultimate electrode for welding steels with highest strength and maximum ductility (AC/DC) Assures non-cracking welds on “problem” steels such as high carbon steels; tool steels; stainless steels; spring steels; manganese steels; and dissimilar steels. Super Missileweld is particularly advantageous when the alloy content of the steel to be welded is known. This unique electrode is so versatile that its applications are virtually too multiple in number to specify. For years, it has been a maintenance and repair “stand-by” in every industry throughout the world.
- Use either AC or DC reverse polarity
- Clean weld area
- Bevel heavy sections
- For high carbon steels, a preheat of 400 F is recommended
- Hold a short arc
- Run stringer beads
- Peening will help relieve stresses
- Let each pass cool and slag will peel off easily
- Tensile strength - 108,000 psi
- Yield strength - 76,000 psi
- Reduction of area - 30%
- Charpy V notch - 75 ft/# @ room temperature
- Rockwell B hardness - 93 - 102 HRB
- Brinell hardness - 200 - 300 HB
- Elongation - 24%
- Frictional resistance - Excellent
- Abrasive resistance - Mild
- Will not respond to heat treatment
- Made in USA
PN: 00SMW500POP
WARNING: This product can expose you to chemicals including Carbon monoxide, 630-08-0 which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.