LINCOLN SUPERARC L-56 .025" 2LB SPOOL MIG WIRE ER70S-6
$19.16
| SuperArc L-56 | |
| AWS | ER70S-6 |
| Diameter (in) | .025 |
| Diameter (mm) | 0.6 |
| Package | 2 lb Plastic Spool (10 lb Carton) |
| Product Number | ED030583 |
Mild Steel, Copper Coated
Lincoln's premium copper coated MIG wire, SuperArc® L-56 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. SuperArc® L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of SuperArc® L-56. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.
Advantage Lincoln |
High levels of manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces
Excellent toe-wetting provides optimal bead appearance
Copper coated for long contact tip life
Supports short-circuiting, globular, axial spray and pulsed spray transfer
Welding Positions All
Typical Application
- Medium to heavy mill scale base material
- Sheetmetal to 380-485 MPa (55-70 ksi) yield strength material
- Automotive repair
- Robotic or hard automation
- Structural steel
Conformance
- AWS A5.18/A5.18M: 2005 and ASME SFA-A5.18: ER70S-6
- AWS A5.17/A5.17M: 1997 EM11K
- ABS 3YSA
- Lloyd's Register: 3YS H15
- DNV Grade: III YMS
- CWB/CSA W48-06: ER49S-6
- DB: EN 440 G3Si1
- TUV: EN 440 G3Si1
- MIL-E-23765/1: MIL-70S-6
Shielding Gas
- 100% CO2
- 75-95% Ar/Balance CO2
- 95-98% Ar/Balance O2
- Flow Rate: 30 - 50 CFH
WARNING: This product can expose you to chemicals including Hexavalent chromium, 18540-29-9 which is known to the State of California to cause cancer and Carbon monoxide, 630-08-0 which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.