4043 - 1/16" x 36" Aluminum TIG Rod - 10 lb

Price

$53.50

Description

4043 - 1/16" x 36" TIG Rod
Aluminum
1lb

**The rod will be cut in half to 18" for USPS First Class Int'l packages**

Chemical Composition (%):

Product	Mn	Si	Cr	Al	Ti	Cu	Others	Fe	Mg	Zn
4043	0.05	4.5 - 6.0	-	Rem.	0.2	0.3	0.15	0.8	0.05	0.1
4047(718)	0.15	11.0 - 13.0	-	Rem.	-	0.3	0.15	0.8	0.1	0.2
5356	0.05 - 0.20	0.25	0.05 - 0.20	Rem.	0.06 - 0.20	0.1	0.15	0.4	4.5 - 5.5	0.1
5556	0.50 - 1.0	0.25	0.05 - 0.20	Rem.	0.05 - 0.20	0.1	0.15	0.4	4.7 - 5.5	0.25

GTAW (TIG) - For manual AC welding, argon is generally preferred because the arc has good stability. On heavier sections, the addition of helium may be considered, and arc penetration will increase significantly; however, gas flow rates must be increased when helium is added.

Material Thickness	Tungsten, Pure or Zirconiated	Wire Size	Welding Current (Amps)	Arc Voltage	Gas Cup	Argon, cfh
1/2"	1/4"	1/4"	400 - 450	25	5/8"	35
3/8"	1/4"	3/16" - 1/4"	330 - 380	15	5/8"	35
1/4"	3/16" - 1/4"	3/16"	220 - 275	15	1/2"	30
3/16"	5/32" - 3/16"	5/32" - 3/16"	170 - 225	15	7/16" - 1/2"	25
1/8"	1/8" - 5/32"	1/8" - 5/32"	125 - 175	15	7/16"	20
1/16"	1/16" - 3/32"	1/16" - 3/32"	70 - 100	15	3/8"	20

WARNING: This product can expose you to chemicals including Carbon monoxide, 630-08-0 which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Item number

HAR 4043-116-36-10

Manufacturer

Harris Products

684032587656

Weight

10.8 lbs