4043 - 1/8" x 36" Aluminum TIG Rod - 10lb

Price

$61.00

Description

**The rod will be cut in half to 18" for USPS First Class Int'l packages**

Chemical Composition (%):

Product	Mn	Si	Cr	Al	Ti	Cu	Others	Fe	Mg	Zn
4043	0.05	4.5 - 6.0	-	Rem.	0.2	0.3	0.15	0.8	0.05	0.1
4047(718)	0.15	11.0 - 13.0	-	Rem.	-	0.3	0.15	0.8	0.1	0.2
5356	0.05 - 0.20	0.25	0.05 - 0.20	Rem.	0.06 - 0.20	0.1	0.15	0.4	4.5 - 5.5	0.1
5556	0.50 - 1.0	0.25	0.05 - 0.20	Rem.	0.05 - 0.20	0.1	0.15	0.4	4.7 - 5.5	0.25

GTAW (TIG) - For manual AC welding, argon is generally preferred because the arc has good stability. On heavier sections, the addition of helium may be considered, and arc penetration will increase significantly; however, gas flow rates must be increased when helium is added.

Material Thickness	Tungsten, Pure or Zirconiated	Wire Size	Welding Current (Amps)	Arc Voltage	Gas Cup	Argon, cfh
1/2"	1/4"	1/4"	400 - 450	25	5/8"	35
3/8"	1/4"	3/16" - 1/4"	330 - 380	15	5/8"	35
1/4"	3/16" - 1/4"	3/16"	220 - 275	15	1/2"	30
3/16"	5/32" - 3/16"	5/32" - 3/16"	170 - 225	15	7/16" - 1/2"	25
1/8"	1/8" - 5/32"	1/8" - 5/32"	125 - 175	15	7/16"	20
1/16"	1/16" - 3/32"	1/16" - 3/32"	70 - 100	15	3/8"	20

WARNING: This product can expose you to chemicals including Carbon monoxide, 630-08-0 which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Item number

HAR 0404360 x10

Manufacturer

Harris Products

684032587694

Weight

10.8 lbs