Harris ER 308L .030" (0.8mm) Stainless Steel MIG Wire 2 lb spool 0308LE2

Most frequently used for base materials of similar composition. 

Similar usage as 308, but the .03% maximum carbon content increases resistance to intergranular corrosion.

 NOMINAL COMPOSITION:
Carbon
.03% max.
Chromium
19.5-22.0%
Nickel
9.0-11.0%
Manganese
1.0-2.5%
Copper
.75% max.
Silicon
.30-.65% max.
Phosphorus
.03% max.
Sulfur
.03% max.
Molybdenum
.75% max.
Iron
Balance
Normal Ferrite Range
5-12

TYPICAL MECHANICAL PROPERTIES AS WELDED:
Yield Strength
57,000
Elongation
34%
Tensile Strength
87,000
Reduction of Area
56%
Charpy V
100 ft./lb.@ room temp.
Brinell Hardness
160 HB
Rockwell B Hardness
85 HRB

APPLICATION:
Used to weld base metals of similar composition such as 201, 202, 301, 302, 304, 305 and 308 (and L series) lower carbon content of .03 % max. used to avoid carbide precipitation

WARNING: This product can expose you to chemicals including Carbon monoxide, 630-08-0 which is known to the State of California to cause birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.