Harris 95/5 Tin-antimony Solder 1/8" x 1 lb spool 95561
$37.00
Tin-antimony solder well suited for applications where moderately elevated temperature is a factor. With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections. Not recommended for use on brass or HVAC connections.
Typical Application: Not recommended for use on brass or HVAC connections.
NOMINAL SOLDER COMPOSITION:
Tin
Balance
Antimony
4.5-5.5%
PHYSICAL PROPERTIES: Mechanical properties of bulk solder
Solidus
452°F(233°C)
Electrical Resistivity
145 n Ω·m at 77 °F (25°C)
Color
Gray Silver
Liquidus
464°F(240°C)
Hardness
15HB
Density
8.52 g/cm3
Shear Strength
11,100 psi (Cu to Cu)
Tensile Strength
14,200 psi (Cu to Cu)
Electrical Conductivity
11.9% IACS at 68°F (20°C)
Elongation in 4”
38%
WARNING: This product can expose you to chemicals including Carbon monoxide, 630-08-0 which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.