Fein KBH 25-2 U 2-speed metal drilling system up to 25 mm 72710361090

Hand-held 2-speed metal core drilling system for universal core and twist bit drilling.

• Work up to 6 times faster due to innovative drilling technology: Pilot hole drilled to a depth of 3/16 in [5 mm] at 1,600 rpm, followed by disengagement of the pilot bit and automatic speed change to 520 rpm for optimal cutting speed for carbide core bits. The carbide core bit finishes drilling the desired hole diameter with minimum effort and specially developed core bit cutting geometry.
• Usable on all common metals and surfaces by adjusting the speed to the particular job.
• Very safe operation due to the torque slip clutch. Protects the user when overloaded by separation of the driver and driven sides.
• Mechanical 2-speed gearbox with speeds from 0-1,600 rpm for efficient twist drilling and forward / reverse rotation for thread tapping up to 1/2 in [M12].
• ** Torque slip clutch.
• Reversible.
• FEIN high-performance motor with excellent speed stability.
• Electronic start.
• Speed selection
• Speed-controlled tacho electronics.
• Variable electronic speed control.
• Torsion-free, barrel-type motor housing.
• Carbide core bits with optimized service life.
• Self-start lock.
• Wide range of accessories.

Includes

• 1 metal core drill KBH 25-2 U
• 1 pilot bit
• 1 handle
• 1 cutting spray
• 1 quick-action chuck 1/8 - 5/8 in dia.
• 1 tool case

Technical data

• Power consumption1,200 Watts
• Power output680 Watts
• 1st gear0-520 rpm
• 2nd gear0-1,600 rpm
• Full load torque442 in/lbs
• No load torque442** in/lbs
• Hole-dia. steel core bits1 in
• Capacity in stainless steel Ø1 in
• Hole-dia. aluminum core bits1-3/16 in
• Mag base, max. drilling depth1 in
• Hole-dia, steel hole saws3-1/8 in
• Hole saws max. drilling depth3/16 in
• Tapping1/2 in
• Minimum clearance1-1/16 in
• Annular cutter holderQuickIN Plus
• Cable with plug13 ft
• Weight according to EPTA7.5 lbs

WARNING: This product can expose you to chemicals including Bis (2-ethylhexyl phthalate (DEHP) and using this product for drilling, sawing, sanding or machining wood, masonry and metal products can expose you to wood, masonry and metal dust, all of which are known by the State of California to cause cancer and birth defects or other reproductive harm.  Avoid inhaling wood, masonry and metal dust or use a dust mask or other safeguards for personal protection.  For more information go to www.P65Warnings.ca.gov.