ESAB Rebel Multi-Process Welder MIG/Stick/TIG EMP 215ic 0558102240 *bundled with spoolgun*

*BONUS ** Rebel bundled with Spoolgun**

You don't know the meaning of a typical day -- What it's like to work 9 to 5 at a desk.  You don't know where you'll wind up on your next job, bu you do know that you'll have to be ready for anything.  And when it comes to welding, that means any process, any power, any material, anywhere, and every time.

Meet REBEL!  The go-anywhere, weld-anything machine that has everything you need to get the job done - start to finish.  It's anything but typical.

HIGH PERFORMANCE
Many machines claim they’re multi-process, but are little more than a MIG machine in disguise. Rebel is a true multi-process welder, which means whether you’re welding MIG, Flux-Cored, Stick – even those tricky 6010 rods – or TIG, Rebel will perform like it was born to run that process. 

CRAZY SMART TECHNOLOGY
Whether you’ve been welding for two years or 20, Rebel can make your job easier with sMIG (smartMIG). For rookies, there’s basic mode, which makes setup simple. And for veterans, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds will truly blow your mind.

VERSATILITY
You never know what welding process your next job will require, or what kind of input power you’ll have available. That’s why we’ve packed Rebel with the kinds of features that give you the flexibility to go anywhere and weld anything.

UNMATCHED TOUGHNESS
You’re on-site, out in the field, and in the shop. So you need a machine that you can move around and that can withstand some serious wear and tear. Rebel can. With a sturdy, five-handle roll cage, steel unibody construction, and IP23S-level protection, it’s the
go-anywhere machine for a reason.

THE TOTAL PACKAGE
It takes more than a machine to get up and welding. So when you buy a Rebel, you can expect all the equipment you need to get going – right out of the box – and from some of the best names in the industry.

THE MOST INCREDIBLE MACHINE ON-SITE.

TRUE MULTI-PROCESS.

•   Professional-grade MIG performance, including flux-cored
•   Excellent Stick performance, including 6010/6011 cellulosic and 308L electrodes
•   Exceptional lift TIG performance down to 5A
•   Compatible with spool gun for welding aluminum

DUAL VOLTAGE.

•   Runs on 120V–230V single-phase input power (adapter included)
•   Top-level performance across all processes – even on 120V power
•   Auto-detect knows what type of input power the machine’s connected to 
•   Runs off a 3.7 kVA (120V) or 7.5 kVA (230V) generator

LARGE, 4.3-INCH COLOR SCREEN.

• Intuitive LCD/TFT display
  
• Well protected by front handles and a hefty composite bezel
• Easily switch from one process to the next
• Built-in on-screen manual, spare parts listing, and welding parameters guide
• Multi-lingual capabilities, including English, French, and Spanish

RUGGED CASE DESIGN.

• Five-handle roll cage for easy transport and handling
  
• Steel unibody housing for increased protection and superior durability
• Recessed body panels for increased strength

NEVER-BEFORE-SEEN sMIG TECHNOLOGY.

Exclusive, built-in dynamic arc control that constantly monitors complex arc characteristics adapting to your technique to provide a smooth, stable arc and superior, repeatable welds.

Produces less spatter and weld defects

Two modes – basic and advanced

• Basic mode reduces the MIG learning curve – set wire diameter and material thickness and you’re ready to weld
• Advanced mode gives full control to adjust the arc characteristics to your liking

SOLID CAST ALUMINUM FEEDER.
The design of this cast feeder mechanism increases durability, decreases wire shavings and bird nesting, provides for easy drive roll changes (no tools required), and delivers consistent feeding performance. All in all it has optimized alignment and long-life drive stand components that ensure accurate, smooth wire feeding

LIGHTWEIGHT.

A 40-pound design makes it easy to carry from jobsite to jobsite.

MULTI-MATERIAL.
Weld steel, stainless, and even aluminum with the optional spool gun.

WELD PARAMETER STORAGE.
Save up to four welding parameters per process; ideal for switching between jobs.

TRIGGER HOLD FUNCTION 2T/4T.
Reduces operator fatigue when MIG or TIG welding.

INFINITE VOLTAGE CONTROL.
Fine-tune the arc characteristic by adjusting the voltage setting.

ADJUSTABLE INDUCTANCE.
Perfect for fine-tuning arc stability and controlling spatter.

ADJUSTABLE BURN-BACK CONTROL.
Prevents wire from sticking in the weld pool or burning back, damaging the contact tip.

ADJUSTABLE ARC FORCE CONTROL.
Optimizes Stick electrode performance and allows the operator to increase the arc voltage for a short period of time to avoid arc outs and “sticking” when the arc is too short.

ADJUSTABLE HOT START CONTROL.
Increases the initial welding current to avoid the electrode sticking to the workpiece; particularly useful for difficult-to-start electrodes.

LIFT TIG ARC STARTS.
Provides TIG arc starts without the use of high frequency. Ideal for the shop or site application where sensitive electronic devices operate.

GAS PRE- AND POST-FLOW TIME ADJUSTMENT.
Purges gas line and prevents porosity at the start and end of welding; especially useful when MIG welding aluminum.

IP23S.
The enclosure is built to protect you and your machine. Designed to a higher standard, Rebel can withstand harsh outdoor environments.

WARRANTY.
Rebel comes backed with a rock-solid, three-year, handle-to-handle warranty and  100-day, 100 percent satisfaction guarantee.

READY-TO-WELD.

•  Tweco Fusion 180 MIG gun with 10-ft. (3-m) cable
• Spare MIG gun parts kit, including contact tips and drive rolls
• Tweco 200A electrode holder with 13-ft. (4-m) cable
• Four general purpose 6013 Stick electrodes
• ESAB 70S-6 .030 4-in., 2-lb. sample spool
• Tweco TIG torch and accessories
• Tweco ground clamp with leads
• Victor argon flowgauge regulator with 12.5-ft. (3.8-m) gas hose
• 120V and 230V adapter plugs

Does NOT include foot control.

TECHNICAL DATA

Current Range 5-150A (120V), 5-240A (230V)

MIG (GMAW) Welding Output
130A/20.5V (120V) @ 20% Duty Cycle
205A/24.3V (230V) @ 25% Duty Cycle

Stick (SMAW) Welding Output
90A/23.6V (120V) @ 40% Duty Cycle
180A/27.2V (230V) @ 25% Duty Cycle

TIG (GTAW) Welding Output
130A/15.2V (120V) @ 40% Duty Cycle
180A/17.2V (230V) @ 30% Duty Cycle

Max Plate Thickness 3/8 in. (12.7 mm)

Protection Class IP23S
Approvals CSA E60974-1-00, IEC 60974-1
Generator Size Recommendation 3.7 kVA (110V); 7.5 kVA (230V)

Weight 40 lbs. (18.2 kg)
Dimensions
H 16 in. x W 9 in. x D 23 in. 
(H 406 mm x W 229 mm x D 584 mm)

Warranty
3 years – handle to handle; 1 year – torch;
100% satisfaction guarantee

*Shipping is free to 48 states.  Please request a quote for other locations.*