*BONUS ** RECEIVE A FREE Weldmark Auto-darkening Variable shade WELDING HELMET WITH THE PURCHASE OF A REBEL ** HURRY, WHILE QUANTITIES LAST**
Get to know Rebel 235.
The true multi-process welder you have to see to believe.
When it comes to getting around and getting work done, the ESAB Rebel EMP 235ic is second to none. It’s the most mobile welder in its class and has the power and performance to crush even the most demanding jobs. In addition to the multi-process system, a single-process Rebel EM 235ic (MIG only) is also available.
Two Purpose-Built Systems.
Rebel EMP 235ic
The bigger, badder Rebel EMP 235ic is the only true multi-process welder in its category, and it's ideal for applications that require MIG, gasless, and gas-shielded Flux-Cored wire, Stick, and TIG. And weighing in at only 53 pounds with an output rating of 235 A, it has a power-to-weight ratio that crushes the competition. With capability to weld the full range of .035 solid wire, you'll be blown away by its increased productivity and deposition rates.
This multi-process machine is packed with Rebel DNA, which is found in every Rebel machine. Features like sMIG technology (now extended to .045 solid wires), an industrial package that fits 12-inch spools, dual voltage capability, and a four-handle roll cage design all make Rebel 235 and its fellow Rebels rise above the rest.
Unmatched Portability.
Rebel EMP 235ic goes where you go. And that's priceless in today's demanding industries. With four perfectly placed handles and the ability to detach the power source from its cart, you can tackle any job, anywhere, with dual voltage capability from 90 V to 270 V. From shop to field, the rugged unibody steel industrial housing gives you the confidence that Rebel 235 can handle even the most demanding environments.
The Power To Perform.
When it comes to portable welders, small means weak, right? Dead wrong. Single-phase Rebel EMP 235ic is packed with the power to weld up to a half inch on mild steel, measuring in at 235 A at 40% duty cycle with a max output of 250 A/30 V.
Versatility
That Can't Be Beat.
Your options are now open with the ability to weld a wide range of metal thicknesses and applications, including the full range of .035 in both short arc and spray arc transfer, up to .045 solid wires, and up to .052 cored wires. Plus, Rebel EMP 235ic can also weld Stick rods up to 5/32 in. and TIG rods up to
3/16 in.
The Total Package.
It takes more than a machine to get up and welding. So when you buy a Rebel EMP 235ic, you can expect all the equipment you need to get going – right out of the box – and from some of the best names in the industry.
- Tweco Spray Master 250 MIG gun with 15 ft. (4.6 m) cable
- Tweco 200 A electrode holder with 13 ft. (4 m) cable
- Tweco 13 ft. (4 m) ground clamp with leads
- Victor argon flowgauge regulator with 12.5 ft. (3.8 m) gas hose
- 110 V adapter plug
- Atom Arc Acclaim 7018 sample pack Stick electrodes
- AristoRod 12.50 .035, 8 in., 11 lb. sample spool
- The optional TIG Torch (0558102493), TIG foot control (W4014450), or Tweco Spool Gun (1027-1398) are sold separately.
Arc Gun Consumables
Max Plate Thickness| Use With Welding Material | 12.7 mm (1/2 in.) |
Arc Holders Clamps & Misc
Arc Power Specifications
| Supply Plug | NEMA6-50P (230 V) |
| Max Output | 250 A |
| Open Circuit VDC | 90 VDC |
| Protection Class | IP23S |
| Setting Range MIG/MAG (V) | 10-30 V |
| Voltage Tolerance | 30 V |
| Current Range(A) | 5-150 A |
| Current Range(V) | 120 V |
| Current Range(A) | 5-250 A |
| Current Range(V) | 230 V |
Input Voltage
| Input Frequency | 50/60 Hz |
| Input VAC | 120, 208/230 VAC |
| Phases | 1ph |
| Supply Voltage | 90-270 V |
Welding Output
| Duty Cycle | 40 % |
| Input VAC | 120 VAC |
| Output Process | MIG (GMAW/FCAW) |
| Temperature | 104 °F (40 °C) |
| VDC Out | 19 VDC |
| Duty Cycle | 40 % |
| Input VAC | 230 VAC |
| Output Process | MIG (GMAW/FCAW) |
| Temperature | 104 °F (40 °C) |
| VDC Out | 26 VDC |
| Duty Cycle | 40 % |
| Input VAC | 120 VAC |
| Output Process | Stick (SMAW) |
| Temperature | 104 °F (40 °C) |
| VDC Out | 23.6 VDC |
| Duty Cycle | 40 % |
| Input VAC | 230 VAC |
| Output Process | Stick (SMAW) |
| Temperature | 104 °F (40 °C) |
| VDC Out | 28.4 VDC |
| Duty Cycle | 40 % |
| Input VAC | 120 VAC |
| Output Process | TIG (GTAW) |
| Temperature | 104 °F (40 °C) |
| VDC Out | 15.2 VDC |
| Duty Cycle | 40 % |
| Input VAC | 230 VAC |
| Output Process | TIG (GTAW) |
| Temperature | 104 °F (40 °C) |
| VDC Out | 19.6 VDC |
Dimensions
| Height | 26.5 in. (673 mm) |
| Length | 19.5 in. (495.3 mm) |
| Width | 11.5 in. (292 mm) |
Input Ratings
| Frequency Hz | 50/60 Hz |
| Phases | 1 |
| VAC | 120, 208/230 VAC |
| Volts | 90-270 V |
Output Ratings
| Model | Conditional Statement | Duty Cycle | Output Current DC | VDC Out |
| MIG (GMAW/FCAW) 120V | Welding Output @ 104 ° F (40 ° C) | 40 % | 120 A | 19 VDC |
| MIG (GMAW/FCAW) 230V | Welding Output @ 104 ° F (40 ° C) | 40 % | 235 A | 26 VDC |
| STICK (SMAW) 120V | Welding Output @ 104 ° F (40 ° C) | 40 % | 90 A | 23.6 VDC |
| STICK (SMAW) 230V | Welding Output @ 104 ° F (40 ° C) | 40 % | 210 A | 28.4 VDC |
| TIG (GTAW) 120V | Welding Output @ 104 ° F (40 ° C) | 40 % | 130 A | 15.2 VDC |
| TIG (GTAW) 230V | Welding Output @ 104 ° F (40 ° C) | 40 % | 240 A | 19.6 VDC |
Power Specifications
| Enclosure Class | IP23S |
| Max Welding Output | 250 A |
| Open Circuit VDC High | 90 VDC |
| Setting Range MIG/MAG (V) | 10-30 V |
| Voltage Tolerance | 30 V |
| Setting Range (A) | 5-150 A |
| Setting Range (V) | 120 V |
| Setting Range (A) | 5-250 A |
| Setting Range (V) | 230 V |
Specifications
| Standards | CSA E60974-1-00 / UL60974-1 / IEC60974-1 |
Weight
Wire Feeder Specifications
| Max Spool Diameter | 4, 8 & 12 in.
100, 200 & 300 mm |
| Wire Feed Speed | 60-700 in./min
1.5-17.89 m/min |
| Metal | Wire Diameter |
| Mild Steel | .023-.045 in.
0.6-1.2 mm |
| Stainless Steel | .030-.045 in.
0.8-1.2 mm |
| Flux Cored | .030-.052 in.
0.8-1.3 mm |
| Aluminum | .030-3/64 in.
0.8-1.2 mm |
*Shipping is free to 48 states. Please request a quote for other locations.*
