Harris 309L Stainless Steel TIG Rod 1/8" x 36" 10 lb 309LT60
$96.00
Used to weld base metals of similar composition in wrought or cast form; also used to weld type 304 and similar base metals where severe conditions may exist. At times used to weld dissimilar steels. The lower carbon content of.03 % max. will help avoid possibility of intergranular carbide precipitation.
NOMINAL COMPOSITION:
Carbon
.03% max.
Chromium
23.0-25.0%
Nickel
12.0-14.0%
Manganese
1.0-2.5%
Copper
.75% max.
Silicon
.30-.65% max.
Phosphorus
.03% max.
Sulfur
.03% max.
Molybdenum
.75% max.
Iron
Balance
Normal Ferrite Range
5-12
TYPICAL MECHANICAL PROPERTIES AS WELDED:
Yield Strength (psi)
58,000
Elongation
40%
Tensile Strength (psi)
87,000
Reduction of Area
60%
Charpy V
105 ft./lb. room temp.
Brinell Hardness
160 HB
Rockwell B Hardness
85 HRB
WARNING: This product can expose you to chemicals including Carbon monoxide, 630-08-0 which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.